Denver – Learn how to Fix a Running Toilet Like an Expert1 min read
When you fix a running toilet, it’s easier than you think. With the best toilet repair service, you’re going to fix a running toilet and not deal with flush problems and high water bills.
Check these guidelines on how to fix a running toilet with or without a toilet repair service.
- Turn off the Water
Perhaps you have an angle stop that comes out of under your toilet. If it stops, you are just going to turn it a quarter. You just have to turn it off and disconnect it slowly.
- Putting a Towel
When you remove the lid, you will see what you’re working on. Once you shut the water off, put a towel to take a part of the supply line.
- Check the Flapper
This is to see if the flush valve has cracks. If so, you will need to change it.
- Changing the Flapper
You only need to unhook the flapper and detach it from the handle. It would be easier to snap it right back into place so you will know if it’s full of water.
- Diaphragm Valve Checking
When you check the diaphragm, you need to make sure there’s debris.
- Get the Parts Back Together
Once you’re done checking if the parts are working, make sure that everything goes back together, like what it was when it’s not apart.